Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
1
- USB-Kabel Knikbeveiliging repareren
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackMiscellaneous Electronics
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
- een veer van een balpenSuperlijm
De veer wordt zo ver over het beschadigde gebied geduwd dat het beschadigde gebied aan beide zijden iets oversteekt. Lijm vervolgens de connectorzijde met superlijm.
Step 1
USB-Kabel Knikbeveiliging repareren
- Outer insulation is damaged but the cable is working.
Outer insulation is damaged but the cable is working.
1024
Step 2
- Spring from an old ballpoint pen, approx. 30mm long.
Spring from an old ballpoint pen, approx. 30mm long.
Step 3
- Turn the spring around the cable.
Turn the spring around the cable.
Step 4
- Then continue to “wrap”.
Then continue to “wrap”.
Step 5
- The spring must be pulled slightly over the old bend protection.
The spring must be pulled slightly over the old bend protection.
Step 6
- Finally fix with super glue and also glue the damaged area.
Finally fix with super glue and also glue the damaged area.
Volg de stappen in omgekeerde volgorde om je apparaat weer in elkaar te zetten.
Cancel: I did not complete this guide.
One other person completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Juraj Sedlacek
Annika Faelker
Toon Konings
Author
with 1 other contributor
John Raster
Member since: 06/24/2013
164 Reputation
1 Guide authored
Badges:
3
