Difficulty
Easy
Steps
4
Time Required
30 minutes - 2 hours
Sections
1
- USB Installation Media Creation
- 4 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSoftware
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Unless your application REQUIRES a DVD, it is generally better to use a USB flash drive that is at least 16GB*.
*An 8GB drive can often be used as well. However, due to the cost difference in manufacturing and retail, these drives tend to only be sold in bulk, unless it is a no-name drive purchased online. Do not waste your time and money on a new 8GB USB drive with how cheap 16GB drives have gotten.
Important: OSes without USB boot support are not guaranteed to work. While the risk of a problem is low, results outside of Linux and modern Windows/MacOS releases are NOT GUARANTEED.
This guide was originally written just for Linux. However, it can be used with any operating system that supports USB boot and is not tied to one specific operating system in practice. Since these operating systems can create unforeseen issues, you are on your own.
- If you have a used USB drive, format it outside of Rufus before use.DVD creation is not covered. It was covered in Revision 1 but got lost with time.This guide is on Revision 3. If you are using Rufus 2.x, refer to Revision 2.
What you need
Step 1
Download Rufus
- It is best to use a new USB drive. If you are reusing an old drive, it must be formatted.
- To write the ISO, download Rufus. Place this somewhere it is easily found.
It is best to use a new USB drive. If you are reusing an old drive, it must be formatted.
To write the ISO, download Rufus. Place this somewhere it is easily found.
1024
Step 2
Download your ISO
- Torrent clients require additional configuration this guide does not cover.
- After downloading Rufus, download the ISO you want to write to the USB drive.
Torrent clients require additional configuration this guide does not cover.
After downloading Rufus, download the ISO you want to write to the USB drive.
Step 3
Locate the ISO
- Default download location: Windows 7/8.x/10: Downloads
- Plug the USB drive in, and find the ISO you want to write.
Default download location: Windows 7/8.x/10: Downloads
Plug the USB drive in, and find the ISO you want to write.
Step 4
Writing the ISO file
- This procedure WILL erase your USB drive!
- If your system has a buggy legacy BIOS, select Add fixes for older BIOSes.
- Open Rufus and click SELECT. Find the ISO and click Open.
- Rufus will ask you to choose ISO or DD mode. If unsure, choose ISO mode.
- After configuring the writing process, click start. Click OK on the formatting warning.
This procedure WILL erase your USB drive!
If your system has a buggy legacy BIOS, select Add fixes for older BIOSes.
Open Rufus and click SELECT. Find the ISO and click Open.
Rufus will ask you to choose ISO or DD mode. If unsure, choose ISO mode.
After configuring the writing process, click start. Click OK on the formatting warning.
Cancel: I did not complete this guide.
10 other people completed this guide.
Author
with 3 other contributors
Nick
Member since: 11/10/2009
80,540 Reputation
41 Guides authored
Badges:
55
+52 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored
Will Unknown - Jul 17, 2017
Reply
Unetbootin does not work anymore and is considered unstable to use when installing any Linux OS, also 4GB USB drives are more than big enough to get the job done
Nick - Jul 18, 2017
My reasoning for saying 8GB is because 4GB sticks are all but nonexistent (8GB is more popular now), but if you already own the 4GB stick then it’ll work. I even use one from 2006 in the guide, to show that reuse is possible.
Oh really? I always thought it was still a usable option - thanks for letting me know that I was wrong.