Difficulty
Easy
Steps
4
Time Required
15 - 30 minutes
Sections
1
- Extrusion Nozzle
- 4 steps
Flags
0
BackUP! Plus 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Turn on your printer
- Plug in the AC Power adapter and USB cable into the back of the printer.
- Connect your printer to the computer via USB.
- Turn on the printer and initialize it.
Plug in the AC Power adapter and USB cable into the back of the printer.
Connect your printer to the computer via USB.
Turn on the printer and initialize it.
1024
Step 2
Verify the nozzle temperature
- Open the UP! software on your computer, and bring up the “maintenance window.”
- Under maintenance, click “extrude.”
- Then, verify if the nozzle temperature is rising by looking at the status box in the same maintenance window.
Open the UP! software on your computer, and bring up the “maintenance window.”
Under maintenance, click “extrude.”
Then, verify if the nozzle temperature is rising by looking at the status box in the same maintenance window.
Step 3
Remove nozzle
- The nozzle needs to be greater than 200 degrees Celsius before removal.
- Before handling the nozzle please put on heat resistant gloves in order to prevent burns.
- Using the 6mm hex wrench, apply force by pushing up to lock the nozzle into the wrench and turn counterclockwise to loosen the nozzle.
The nozzle needs to be greater than 200 degrees Celsius before removal.
Before handling the nozzle please put on heat resistant gloves in order to prevent burns.
Using the 6mm hex wrench, apply force by pushing up to lock the nozzle into the wrench and turn counterclockwise to loosen the nozzle.
Step 4
Attach the new nozzle
- Before attaching the new nozzle, make sure the temperature is still greater than 200 degrees Celsius.
- Attach the new nozzle with the hex wrench by screwing it on in a clockwise manner.
- If there is any extra plastic coming out of the extruder, cut it off before attaching the new nozzle.
Before attaching the new nozzle, make sure the temperature is still greater than 200 degrees Celsius.
Attach the new nozzle with the hex wrench by screwing it on in a clockwise manner.
If there is any extra plastic coming out of the extruder, cut it off before attaching the new nozzle.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
valerie boyer
Member since: 10/12/2014
496 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 14-31, Maness Fall 2014
Member of Cal Poly, Team 14-31, Maness Fall 2014
CPSU-MANESS-F14S14G31
4 Members
5 Guides authored
Nima - Jun 25, 2019
Reply
I have a problem with my UP PLUS 3D printer and I really need your help. First printer started to stop in the middle of the printing, then got to the point where I wasn’t even able to connect it to my laptop (it didn’t recognize it) and now, when I press Print, before even slicing completes, the software crashes and I have to reopen (basically I can’t print anything as every time I try, same thing happens). The weird part is that sometimes I can adjust the bed, heat up extruder, extract or retract filament from software but the moment I press print, it dies. PLEASE HELP!!!