Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Battery
- 4 steps
Flags
3
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Needs Transcription
This guide is in video form only. Help make it more accessible by transcribing each action of the procedure into a separate step and adding photos.
BackUnihertz Jelly Phone
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Changing the battery for Jelly/Jelly Pro is easy, but finding the battery may not be. The following batteries are compatible:
Manufacturer: Unihertz, 950mAh. LBA 1509
If not available, look for Kyocera Kona S2150 or S2151 batteries, to replace Part No.: SCP-50LBPS, or Part No.: 5AAXBT062GEA. For example, this battery is tested to compatible:
Manufacturer: Cameron Sino, 950mAh, CS-KYS215XL
These are 3.7 or 3.8 Volt 950 mAh batteries (Cameron Sino may have X-Longer logo printed on it). Orient the battery so that the terminals are located on top, +/- markings facing you. In this orientation, negative terminal MUST be leftmost (closest to the battery left side). This is very important as there are batteries of similar dimensions but reversed polarity. Be careful if you go after non-Unihertz battery! Check polarity/voltage.
The back cover of the phone is removable. There is a slot at the bottom corner of the back cover from which it can be pryed open. The battery is user replacebale.
See this youtube video for back cover removal:
https://www.youtube.com/watch?v=YGb5p7ah…
What you need
Step 1
Battery
- Purchase the right battery: either Unihertz or Cameron Sino.
Purchase the right battery: either Unihertz or Cameron Sino.
1024
Step 2
- Remove the back cover using a plastic opening pick or similar tool. Back cover has a slot at one of the bottom corners to make starting the removal easier.
Remove the back cover using a plastic opening pick or similar tool. Back cover has a slot at one of the bottom corners to make starting the removal easier.
Step 3
- Replace the battery.
Replace the battery.
Step 4
- Replace the back cover.
Replace the back cover.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
DmK
Member since: 01/18/2015
181 Reputation
1 Guide authored
Badges:
4
+1 more badge
Andrew Rattle - Sep 30, 2022
Reply
hey thanks for recommending the battery for the Kyocera Kona Cameron Sino battery. my unihertz battery died and diddnt really wanna order another of the one that barely lasted. thanks lots DmK hopefully this battery lasts better.