Difficulty
Difficult
Steps
2
Time Required
20 - 25 minutes
Sections
1
- Speaker
- 2 steps
Flags
0
BackUniden UTAB71
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Speaker
- Use a plastic pry tool to undo the clips that attach the two halves of the tablet.
- Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly.
- Make sure the tablet is powered off before prying open.
- There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.
Use a plastic pry tool to undo the clips that attach the two halves of the tablet.
Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly.
Make sure the tablet is powered off before prying open.
There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.
1024
Step 2
- Use a soldering tool to disconnect the speaker wires off the motherboard.
- If you have no experience in soldering, please follow this guide
Use a soldering tool to disconnect the speaker wires off the motherboard.
If you have no experience in soldering, please follow this guide
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Ryan Jewell
Member since: 10/20/2016
422 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 5-4, Martin Fall 2016
Member of UMass Dartmouth, Team 5-4, Martin Fall 2016
UMASSD-MARTIN-F16S5G4
3 Members
8 Guides authored
