Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Camera
- 4 steps
Flags
0
BackUniden UTAB71
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera
- Use a plastic pry tool to separate the two halves of the tablet.
- Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly.
- Make sure the tablet is powered off before prying open.
- There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.
Use a plastic pry tool to separate the two halves of the tablet.
Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly.
Make sure the tablet is powered off before prying open.
There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.
1024
Step 2
- Use a credit card to lift the battery off the back of the tablet.
- Do not put any pressure on the motherboard or any other internal components.
- The battery is glued onto the back of the tablet so make sure to apply as much pressure as needed
Use a credit card to lift the battery off the back of the tablet.
Do not put any pressure on the motherboard or any other internal components.
The battery is glued onto the back of the tablet so make sure to apply as much pressure as needed
Step 3
- Undo the clips off the power ribbon connecting the camera to the motherboard using the blue pry tool.
Undo the clips off the power ribbon connecting the camera to the motherboard using the blue pry tool.
Step 4
- Use the pry tool to remove the yellow tape from the power ribbon connected to the camera.
- Place the plastic pry tool under the camera component and lift it off the tablet.
Use the pry tool to remove the yellow tape from the power ribbon connected to the camera.
Place the plastic pry tool under the camera component and lift it off the tablet.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Ryan Jewell
Member since: 10/20/2016
422 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 5-4, Martin Fall 2016
Member of UMass Dartmouth, Team 5-4, Martin Fall 2016
UMASSD-MARTIN-F16S5G4
3 Members
8 Guides authored