Uniden Guardian G955 Speaker Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 7 minutes

Sections

Speaker
6 steps

Flags

BackUniden Guardian G955
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Speaker

Using a J1 Philips head screwdriver, unscrew all four 6.1 mm screws.

Using a J1 Philips head screwdriver, unscrew all four 6.1 mm screws.

1024

Step 2

Using a metal spudger, open the monitor from the corner. Slowly slide the spudger around the case to prop open the case.

Using a metal spudger, open the monitor from the corner. Slowly slide the spudger around the case to prop open the case.

Step 3

Locate the circular speaker in one of the corners of the device. To release the speaker, pinch the metal fastener together and lift it off of the speaker.

Locate the circular speaker in one of the corners of the device. To release the speaker, pinch the metal fastener together and lift it off of the speaker.

Step 4

Follow the speaker towards the input on the motherboard. Pull it from the motherboard horizontally for it to loosen easier.
You may have to wiggle the head of the wire to efficiently remove it from the motherboard.

Follow the speaker towards the input on the motherboard. Pull it from the motherboard horizontally for it to loosen easier.

You may have to wiggle the head of the wire to efficiently remove it from the motherboard.

Step 5

Using an angled ESD tweezer, pull back on the black clamp with one hand while lifting the wires with the other hand.
You will have to apply a large amount of force on the black clamp to get it to move enough to lift the two wires out of it.

Using an angled ESD tweezer, pull back on the black clamp with one hand while lifting the wires with the other hand.

You will have to apply a large amount of force on the black clamp to get it to move enough to lift the two wires out of it.

Step 6

Carefully lift the speaker and all of the components in the speaker socket off of the monitor.
The speaker’s film may be glued down to the socket where it’s held. If this is the case, you must pull it all off and carefully clean it so that you may add the new speaker and ensure it fits with no leftover glue residue from the previous speaker.

Carefully lift the speaker and all of the components in the speaker socket off of the monitor.

The speaker’s film may be glued down to the socket where it’s held. If this is the case, you must pull it all off and carefully clean it so that you may add the new speaker and ensure it fits with no leftover glue residue from the previous speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Fabian Demiro

Member since: 10/06/2016

177 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 1-1, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 1-1, Nance Fall 2016 



                    USFT-NANCE-F16S1G1                     


                                            3 Members                     


                                            8 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team