Difficulty
Difficult
Steps
4
Time Required
20 minutes
Sections
1
- Power Button
- 4 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackUniden Guardian G955
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power Button
- Use a J1 Phillips screwdriver to remove the four 6.1 mm screws at the back of the monitor.
Use a J1 Phillips screwdriver to remove the four 6.1 mm screws at the back of the monitor.
1024
Step 2
- Use a metal spudger or an opening tool to pry open the device.
Use a metal spudger or an opening tool to pry open the device.
Step 3
- Use a J1 Phillips screwdriver to remove the three 6.1 mm screws on the motherboard.
Use a J1 Phillips screwdriver to remove the three 6.1 mm screws on the motherboard.
Step 4
- Carefully, lift the motherboard and turn it to the backside.
- Desolder the four corners of the power button. Please follow this link on how to proceed to desolder: How To Solder and Desolder Connections
Carefully, lift the motherboard and turn it to the backside.
Desolder the four corners of the power button. Please follow this link on how to proceed to desolder: How To Solder and Desolder Connections
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Pauline Lara
Member since: 10/04/2016
301 Reputation
2 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team 1-1, Nance Fall 2016
Member of USF Tampa, Team 1-1, Nance Fall 2016
USFT-NANCE-F16S1G1
3 Members
8 Guides authored