Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes

Sections

1

  • Keypad
  • 6 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackUniden EXP371

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Dissassemble the Uniden EXP 371 phone
  • Refer to the Uniden EXP 371 phone disassembly guide to open the plastic casing.

Refer to the Uniden EXP 371 phone disassembly guide to open the plastic casing.

1024

Step 2

  • Use the Phillips #1 screwdriver to unscrew the screws located at the bottom left and right hand corners and top of the phone; as shown in the image.

Use the Phillips #1 screwdriver to unscrew the screws located at the bottom left and right hand corners and top of the phone; as shown in the image.

Step 3

  • Remove the motherboard once the screws holding it in place are undone.
  • Once the motherboard has been removed, remove the rubber button pad located behind the motherboard and in front of the dial pad.

Remove the motherboard once the screws holding it in place are undone.

Once the motherboard has been removed, remove the rubber button pad located behind the motherboard and in front of the dial pad.

Step 4

  • After the rubber pad is removed remove the dial pad (buttons) from the phone.

After the rubber pad is removed remove the dial pad (buttons) from the phone.

Step 5

              [OPTIONAL ] Soak dial pad in mixture of soap and water
  • If the buttons are sticky; leaving the dial pad and/or rubber pad to soak in soap and water for 5-10 minutes will clean off any sticky residue that may be obstructing the buttons.
  • Make sure to properly dry the dial pad and rubber pad of any soap/water before reattaching them to the phone to avoid the risk of short circuiting.

If the buttons are sticky; leaving the dial pad and/or rubber pad to soak in soap and water for 5-10 minutes will clean off any sticky residue that may be obstructing the buttons.

Make sure to properly dry the dial pad and rubber pad of any soap/water before reattaching them to the phone to avoid the risk of short circuiting.

Step 6

              Order a New Dial Pad

If sticky residue is not the problem the next step is to visit http://udn.factoryoutletstore.com and search for the UNIDEN EXP 371 and order a new dial pad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Lucas Mohsen

Member since: 10/31/2014

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team 2-1, Duarte Fall 2014                        

                                                  Member of UMass Dartmouth, Team 2-1, Duarte Fall 2014 



                    UMASSD-DUARTE-F14S2G1                     


                                            4 Members                     


                                            10 Guides authored