Difficulty

Moderate

Steps

5

Time Required

                          20 minutes

Sections

2

  • Uniden EXP 371 Teardown
  • 4 steps
  • Antenna
  • 1 step

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackUniden EXP371

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Uniden EXP 371 Teardown
  • Uniden EXP371 900 MHz Cordless Phone.
  • 900 MHz Extended Range with One Touch RocketDial/Find Handset Locator and is Desk or Wall Mountable.

Uniden EXP371 900 MHz Cordless Phone.

900 MHz Extended Range with One Touch RocketDial/Find Handset Locator and is Desk or Wall Mountable.

1024

Step 2

  • Remove the battery by first pressing down on the rear of the cover and pushing the cover towards the bottom of the phone.
  • Next remove the battery by pulling on the connector.

Remove the battery by first pressing down on the rear of the cover and pushing the cover towards the bottom of the phone.

Next remove the battery by pulling on the connector.

Step 3

  • Next remove the two screws at the bottom of the phone with a PH1 philips screwdriver.
  • Now remove the top portion of the case from the bottom. This may be difficult to do with your bare hands. The use of a plastic opening tool may come in handy.

Next remove the two screws at the bottom of the phone with a PH1 philips screwdriver.

Now remove the top portion of the case from the bottom. This may be difficult to do with your bare hands. The use of a plastic opening tool may come in handy.

Step 4

  • Your next step is to remove the five screws holding down the motherboard. Use the PH1 philips screwdriver.
  • Once you have removed the five screws you may lift the motherboard off of the front case.
  • At this point you may also remove the dial pad. It simply lifts off.
  • You may also remove the speaker if needed by unscrewing the two screws using the PH1 philips screwdriver.
  • The whole phone is now disassembled at this point.

Your next step is to remove the five screws holding down the motherboard. Use the PH1 philips screwdriver.

Once you have removed the five screws you may lift the motherboard off of the front case.

At this point you may also remove the dial pad. It simply lifts off.

You may also remove the speaker if needed by unscrewing the two screws using the PH1 philips screwdriver.

The whole phone is now disassembled at this point.

Step 5

              Antenna
  • After following the teardown guide. Take the bottom case and locate the antenna at the top of the phone.
  • Lift the bottom of the the antenna with the aid of a tool (these tweezers work well) and push the antenna inside the phone to remove it.
  • To reassemble the phone, follow the steps in the reverse order.

After following the teardown guide. Take the bottom case and locate the antenna at the top of the phone.

Lift the bottom of the the antenna with the aid of a tool (these tweezers work well) and push the antenna inside the phone to remove it.

To reassemble the phone, follow the steps in the reverse order.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Eric Rodrigues

Member since: 10/16/2014

343 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team 2-1, Duarte Fall 2014                        

                                                  Member of UMass Dartmouth, Team 2-1, Duarte Fall 2014 



                    UMASSD-DUARTE-F14S2G1                     


                                            4 Members                     


                                            10 Guides authored