Difficulty

Moderate

Steps

14

Time Required

                          15 - 30 minutes

Sections

1

  • Uniden D1688 multistation and handset disassembly
  • 14 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackUniden D1688

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Uniden D1688 multistation and handset disassembly
  • Unplug the phone from the base by detaching the RJ-11 plug.
  • Flip the base upside down, and use the Phillips #01 screwdriver to unscrew the seven screws (Head size: 5.11mm, length: 8.6mm) on the underside of the base.

Unplug the phone from the base by detaching the RJ-11 plug.

Flip the base upside down, and use the Phillips #01 screwdriver to unscrew the seven screws (Head size: 5.11mm, length: 8.6mm) on the underside of the base.

1024

Step 2

  • Using the spudger, separate the top shell of the base from the bottom shell from the base.
  • Use care when separating the base so the ribbon cable between the top shell circuit board and the bottom shell circuit board is not damaged!

Using the spudger, separate the top shell of the base from the bottom shell from the base.

Use care when separating the base so the ribbon cable between the top shell circuit board and the bottom shell circuit board is not damaged!

Step 3

  • Unscrew the 3 screws (Head Size: 4mm Length: 8.6 mm) from the top shell circuit board.

Unscrew the 3 screws (Head Size: 4mm Length: 8.6 mm) from the top shell circuit board.

Step 4

  • Unscrew the 2 screws (Head Size: 4mm Length: 8.66) on the small circuit board in the top shell.

Unscrew the 2 screws (Head Size: 4mm Length: 8.66) on the small circuit board in the top shell.

Step 5

  • Disconnect the ribbon cable from the bottom shell circuit board.

Disconnect the ribbon cable from the bottom shell circuit board.

Step 6

  • Release the speaker from the locking pin by pushing down on each ending side of the pin and pushing it away from the speaker.

Release the speaker from the locking pin by pushing down on each ending side of the pin and pushing it away from the speaker.

Step 7

  • Remove rubber keyboard underlay from top shell.

Remove rubber keyboard underlay from top shell.

Step 8

  • Push the plastic keyboard pieces out of the top shell.

Push the plastic keyboard pieces out of the top shell.

Step 9

  • Unscrew bottom shell circuit board screws (Head size: 4mm Length: 8.6mm).

Unscrew bottom shell circuit board screws (Head size: 4mm Length: 8.6mm).

Step 10

  • The disassembly of the phone base is complete!
  • Now this guide will move on to taking apart one of the handsets.

The disassembly of the phone base is complete!

Now this guide will move on to taking apart one of the handsets.

Step 11

  • Slide the battery cover off of the handset, and unplug the battery.

Slide the battery cover off of the handset, and unplug the battery.

Step 12

  • Remove the battery, and unscrew the two screws (Head Size: 4mm Length: 8.6 mm).

Remove the battery, and unscrew the two screws (Head Size: 4mm Length: 8.6 mm).

Step 13

  • Use spudger to separate the phone shell.

Use spudger to separate the phone shell.

Step 14

  • Unscrew the two screws (Head Size: 4mm Length: 8.6mm) on the bottom shell keeping the speaker locking pin in place.

Unscrew the two screws (Head Size: 4mm Length: 8.6mm) on the bottom shell keeping the speaker locking pin in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 


                    Nicholas Weeks

Member since: 01/27/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Pasco Hernando, Team 1-4, Prince Winter 2015                        

                                                  Member of Pasco Hernando, Team 1-4, Prince Winter 2015 



                    PHSC-PRINCE-W15S1G4                     


                                            6 Members                     


                                            10 Guides authored