Difficulty
Moderate
Steps
2
Time Required
Suggest a time??
Sections
1
- Uniden D1688 Base Replacement
- 2 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackUniden D1688
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Uniden D1688 Base Replacement
- Unplug the phone from the base by detaching the RJ-11 plug.
- Flip the base upside down, and use the Phillips #01 screwdriver to unscrew the seven screws (Head size: 5.11mm, length: 8.6mm) on the underside of the base.
Unplug the phone from the base by detaching the RJ-11 plug.
Flip the base upside down, and use the Phillips #01 screwdriver to unscrew the seven screws (Head size: 5.11mm, length: 8.6mm) on the underside of the base.
1024
Step 2
- Using the spudger, separate the top shell of the base from the bottom shell from the base.
- Use care when separating the base so the ribbon cable between the top shell circuit board and the bottom shell circuit board is not damaged!
- Lift the top shell off the bottom, and you have successfully opened the phone base.
Using the spudger, separate the top shell of the base from the bottom shell from the base.
Use care when separating the base so the ribbon cable between the top shell circuit board and the bottom shell circuit board is not damaged!
Lift the top shell off the bottom, and you have successfully opened the phone base.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
justin
Member since: 01/26/2015
419 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
Pasco Hernando, Team 1-4, Prince Winter 2015
Member of Pasco Hernando, Team 1-4, Prince Winter 2015
PHSC-PRINCE-W15S1G4
6 Members
10 Guides authored