Unbranded Ub 15Ms10 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          30 minutes            

Sections

1

• Screen
• 8 steps

Flags

2

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackUnbranded UB-15MS10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Screen               

• Use an opening tool to pry off the lid of the memory card compartment.

Use an opening tool to pry off the lid of the memory card compartment.

1024

Step 2

• Use a Phillips #00 Screwdriver to unscrew the two 1.2mm screws within the compartment. This allows the device to be opened.

Use a Phillips #00 Screwdriver to unscrew the two 1.2mm screws within the compartment. This allows the device to be opened.

Step 3

• Insert opening tools to partially pry open the cover.

Insert opening tools to partially pry open the cover.

Step 4

• With the cover being partially held open, slide a spudger around the seam to pry off the cover.

With the cover being partially held open, slide a spudger around the seam to pry off the cover.

Step 5

• Remove the tape that is holding the battery in place.

Remove the tape that is holding the battery in place.

Step 6

• Unscrew the five 1.2mm screws that connect the circuit board to the device.

Unscrew the five 1.2mm screws that connect the circuit board to the device.

Step 7

• There are three silver tabs around the internal components that connect it to the frame with screws. Unscrew these screws to remove the internal components.

There are three silver tabs around the internal components that connect it to the frame with screws. Unscrew these screws to remove the internal components.

Step 8

• Carefully lift the internal components from the screen and place them into a replacement screen.

Carefully lift the internal components from the screen and place them into a replacement screen.

To reassemble your device, follow instructions 1-7 in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Evan Peterson                     

Member since: 03/08/2017

320 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team S5-G5, Botvin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S5-G5, Botvin Spring 2017 



                    UMASSD-BOTVIN-S17S5G5                     


                                            3 Members                     


                                            4 Guides authored                     

Alfred H. Schaefer - Nov 16, 2021

Reply

All the instruction are fine to follow except the last one, step 8. What tool to use to lift the internal components from the screen frame or where to start to lift without damage to the internal components?