uAttend bn6000 Biometric Fingerprint LAN Time Clock
Student-Contributed Wiki
An awesome team of students from our education program made this wiki.
This troubleshooting guide will help you find solution for common uAttend BN6000 problems.
The uAttend bn6000 is unable to connect to the network server.
The uAttend time clock must be plugged directly into an internet router to ensure proper network connectivity. Make sure your internet connection is active and working properly
If the time clock is unable to connect to the network server, you may be experiencing problems with your modem or router. Turn off your router, wait 30 seconds, then turn back on. If problem persists, contact your internet service provider.
The time clock is not powering up properly for use.
The AC adapter must be connected properly to the clock and also plugged into a 110VAC power source to operate properly. Check to make sure that both ends of the AC adapter are plugged in fully.
You must have a live 110VAC power supply to efficiently operate the clock. Check and make sure that unit is plugged in properly to a live power source.
The keyboard is not registering the correct items when pressed.
The keyboard must be clean of debris in order to operate properly. Clean the keyboard with electronics cleaner and blow off excess debris with Air Duster.
If the keyboard is clean and still not operating properly, turn clock off by unplugging, wait 30 seconds, and then plug clock back in to restart.
If keyboard is still not responding after above steps, replacement of keyboard component may be necessary. keyboard Replacement Guide
Failure to read fingerprint scan.
Finger must be wiped clean of dirt and debris for scanner to properly recognize finger print. Wipe with cleaning cloth and scan again.
Scanner must be wiped clean of dirt and debris to recognize finger print properly. Wipe scanner screen with electronics cleaning cloth and scan again.
Finger must be placed in proper central position on screen in order to recognize fingerprint properly. Center finger on screen and scan again.
In the case that all of the above troubleshooting solutions don’t work, remove and replace fingerprint scanner screen. Fingerprint Replacement Guide
PIN unrecognizable when entered.
Each employee is given a personal ID number which what be entered in paper sequence for proper time clock open it. Make sure proper PIN was entered.
User must be added and registered to the user template in order to clock-in/clock-out properly. uAttend User Templates
In the case that device was reset to factory settings, all user ID’s must be re-entered as new user templates. Device reset
