Difficulty
Moderate
Steps
4
Time Required
4 minutes
Sections
2
- Disassembly
- 2 steps
- Speaker
- 2 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackuAttend bn6000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disassembly
- Make sure to unplug the device before starting.
- Flip the device over.
- Remove the four 10mm PH #2 screws by rotating the screwdriver counterclockwise, removing the screw from the housing completely.
Make sure to unplug the device before starting.
Flip the device over.
Remove the four 10mm PH #2 screws by rotating the screwdriver counterclockwise, removing the screw from the housing completely.
1024
Step 2
- Separate the two cover pieces carefully by pulling apart the two cover pieces away from each other.
Separate the two cover pieces carefully by pulling apart the two cover pieces away from each other.
Step 3
Speaker
- Remove the two 5mm PH #1 screws from the speaker assembly, by rotating the screwdriver counterclockwise, removing the screw from the housing completely.
- Remove the speaker assembly from the unit, by lifting the speaker up and away from the housing.
Remove the two 5mm PH #1 screws from the speaker assembly, by rotating the screwdriver counterclockwise, removing the screw from the housing completely.
Remove the speaker assembly from the unit, by lifting the speaker up and away from the housing.
Step 4
- Remove the bundled cable carefully, by prying up on it with the plastic opening tool.
- Carefully remove speaker from unit by pulling it up and away from housing.
Remove the bundled cable carefully, by prying up on it with the plastic opening tool.
Carefully remove speaker from unit by pulling it up and away from housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
abdullah sumait
Member since: 09/20/2017
419 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
Idaho State University, Team S4-G1, Watkins Fall 2017
Member of Idaho State University, Team S4-G1, Watkins Fall 2017
ISU-WATKINS-F17S4G1
3 Members
5 Guides authored