Uattend Bn6000 Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 - 6 minutes            

Sections

2

• Disassembly
• 2 steps
• Keyboard
• 2 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

• BackuAttend bn6000

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disassembly               

• Make sure to unplug the device before starting.
• Flip the device over.
• Remove the four 10mm PH #2 screws by rotating the screwdriver counterclockwise, removing the screw from the housing completely.

Make sure to unplug the device before starting.

Flip the device over.

Remove the four 10mm PH #2 screws by rotating the screwdriver counterclockwise, removing the screw from the housing completely.

1024

Step 2

• Separate the two cover pieces carefully by pulling apart the two cover pieces away from each other.

Separate the two cover pieces carefully by pulling apart the two cover pieces away from each other.

Step 3

              Keyboard               

• Remove the five 7mm PH #1 screws from the back of the keypad, by rotating the screw driver counter clockwise, removing the screw from the housing completely.

Remove the five 7mm PH #1 screws from the back of the keypad, by rotating the screw driver counter clockwise, removing the screw from the housing completely.

Step 4

• Remove the bundled cable connector from the keyboard by pulling the cable away from the connector in the same direction as the individual wires are running.

Remove the bundled cable connector from the keyboard by pulling the cable away from the connector in the same direction as the individual wires are running.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Will Mastel                     

Member since: 09/19/2017

113 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Idaho State University, Team S4-G1, Watkins Fall 2017                        

                                                  Member of Idaho State University, Team S4-G1, Watkins Fall 2017 



                    ISU-WATKINS-F17S4G1                     


                                            3 Members                     


                                            5 Guides authored