Turtle Beach Ear Force Xo One Adapter Buttons Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Adapter Buttons
4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackTurtle Beach Ear Force XO One
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Adapter Buttons

Using a Philips head screwdriver, unscrew the two screws on the back of the adapter.
The recommended screwdriver bit size is a PH 000.

Using a Philips head screwdriver, unscrew the two screws on the back of the adapter.

The recommended screwdriver bit size is a PH 000.

1024

Step 2

Using your hands and/or a prying tool, carefully pry open the adapter.
This step may require a bit of force to complete.
Be aware that the adapter is held together with clips on the inside at some locations.
Do not be alarmed if it makes a snapping sound as it comes apart, this is most likely just the sound of the clips detaching.

Using your hands and/or a prying tool, carefully pry open the adapter.

This step may require a bit of force to complete.

Be aware that the adapter is held together with clips on the inside at some locations.

Do not be alarmed if it makes a snapping sound as it comes apart, this is most likely just the sound of the clips detaching.

Step 3

Now, using the same Philips head screwdriver, unscrew the two screws on either side that hold the circuit board to the adapter case.
Once the screws are out, you can remove the circuit board from the casing.

Now, using the same Philips head screwdriver, unscrew the two screws on either side that hold the circuit board to the adapter case.

Once the screws are out, you can remove the circuit board from the casing.

Step 4

Push the rubber piece containing the buttons out of the plastic adapter casing.
Then, replace it with a new one.

Push the rubber piece containing the buttons out of the plastic adapter casing.

Then, replace it with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Joseph Lane

Member since: 10/27/2015

128 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team 3-1, Shastany Fall 2015                        

                                                  Member of UMass Dartmouth, Team 3-1, Shastany Fall 2015 



                    UMASSD-SHASTANY-F15S3G1                     


                                            3 Members                     


                                            6 Guides authored

Better Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Better Introduction

What you need

Team