Turtle Beach Ear Force Xo Four Speaker Cone Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          3 - 5 minutes            

Sections

2

• Ear Cushion
• 3 steps
• Speaker Cone
• 2 steps

Flags

0

• BackTurtle Beach Ear Force XO Four

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Ear Cushion               

• Insert a flat metal object (such as iFixit’s Jimmy tool) between the green and black plastic portions of the headset.
• When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

Insert a flat metal object (such as iFixit’s Jimmy tool) between the green and black plastic portions of the headset.

When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

1024

Step 2

• Carefully pry the plastic pieces apart, working your way around the ear cushion.
• Be sure not to break the tabs on the back side of the ear pad!

Carefully pry the plastic pieces apart, working your way around the ear cushion.

Be sure not to break the tabs on the back side of the ear pad!

Step 3

• Pull the loosened ear pad apart from the rest of the speaker.
• Pushing the pad and the speaker back together is the only step required for ear pad reassembly.

Pull the loosened ear pad apart from the rest of the speaker.

Pushing the pad and the speaker back together is the only step required for ear pad reassembly.

Step 4

              Speaker Cone               

• Remove four 7.3mm PH0 screws.
• As these screws are very small, it may be best to keep them in a plastic bag or other container.

Remove four 7.3mm PH0 screws.

As these screws are very small, it may be best to keep them in a plastic bag or other container.

Step 5

• Lift speaker cone off of the back casing.
• Be gentle; the small wires connecting the speaker cone to the rest of the device may break if you pull too hard.
• Follow iFixit’s soldering guide to remove the wires connected to the speaker.

Lift speaker cone off of the back casing.

Be gentle; the small wires connecting the speaker cone to the rest of the device may break if you pull too hard.

Follow iFixit’s soldering guide to remove the wires connected to the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Evalyn Johnson                     

Member since: 09/22/2015

228 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Baylor, Team 10-14, Williams Fall 2015                        

                                                  Member of Baylor, Team 10-14, Williams Fall 2015 



                    BU-WILLIAMS-F15S10G14                     


                                            3 Members                     


                                            8 Guides authored