Difficulty
Moderate
Steps
5
Time Required
6 minutes
Sections
1
- Audio Adapter
- 5 steps
Flags
0
BackTurtle Beach Ear Force XO Four
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Audio Adapter
- With your fingers, pry apart the back casing of the audio adapter.
- A lot of force is required, so do not be afraid to pull hard.
With your fingers, pry apart the back casing of the audio adapter.
A lot of force is required, so do not be afraid to pull hard.
1024
Step 2
- Remove the three black T4 4.9mm screws from around the outside on the back of the audio adapter.
- Loosen the two silver T5 screws as much as possible.
- These two silver screws do not detach from the audio adapter.
Remove the three black T4 4.9mm screws from around the outside on the back of the audio adapter.
Loosen the two silver T5 screws as much as possible.
These two silver screws do not detach from the audio adapter.
Step 3
- Separate the two pieces to reveal the rubber casing behind the buttons.
Separate the two pieces to reveal the rubber casing behind the buttons.
Step 4
- Remove the two PH000 5.5mm screws from the smaller circuit board.
- Remove the board.
Remove the two PH000 5.5mm screws from the smaller circuit board.
Remove the board.
Step 5
- Detach the wires from the smaller circuit board.
Detach the wires from the smaller circuit board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Cody Barrett
Member since: 09/22/2015
453 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Baylor, Team 10-14, Williams Fall 2015
Member of Baylor, Team 10-14, Williams Fall 2015
BU-WILLIAMS-F15S10G14
3 Members
8 Guides authored