Turtle Beach Ear Force P11 Microphone Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Microphone
4 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackTurtle Beach Ear Force P11
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Microphone

Remove the microphone cover by unscrewing the screw on the front side of the microphone.
It is recommended to use #000 Philips head screwdriver.

Remove the microphone cover by unscrewing the screw on the front side of the microphone.

It is recommended to use #000 Philips head screwdriver.

1024

Step 2

Use a nylon or metal spudger set to lift out the microphone.
Be careful lest you might break the fragile wires.
Always try using a plastic tool before resorting to a metal tool as shown in the picture.

Use a nylon or metal spudger set to lift out the microphone.

Be careful lest you might break the fragile wires.

Always try using a plastic tool before resorting to a metal tool as shown in the picture.

Step 3

De-solder the microphone wires and remove the microphone.
Use low heat for de - soldering
Do not cut the white and black wires soldered to the microphone as you might reduce the length of wire required to reassemble.

De-solder the microphone wires and remove the microphone.

Use low heat for de - soldering

Do not cut the white and black wires soldered to the microphone as you might reduce the length of wire required to reassemble.

Step 4

Solder the new microphone wires in the same position as the old one.
It is advisable to use a lead free solder
Use a small amount of solder to not mix up the connections and prevent short circuiting.
You can find more information on How to Solder here: How To Solder and Desolder Connections
To complete reassembly replace the cover taken off in step 1.

Solder the new microphone wires in the same position as the old one.

It is advisable to use a lead free solder

Use a small amount of solder to not mix up the connections and prevent short circuiting.

You can find more information on How to Solder here: How To Solder and Desolder Connections

To complete reassembly replace the cover taken off in step 1.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Bhavesh Gandhi

Member since: 09/26/2015

549 Reputation

                                      3 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       IUPUI, Team 1-2, Wilson Fall 2015                        

                                                  Member of IUPUI, Team 1-2, Wilson Fall 2015 



                    IUPUI-WILSON-F15S1G2                     


                                            2 Members                     


                                            6 Guides authored

Incorrect Tools#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Incorrect Tools

Introduction

What you need

Team