Difficulty
Moderate
Steps
7
Time Required
20 minutes
Sections
3
- Panel
- 4 steps
- Keys
- 2 steps
- Led Lights
- 1 step
Flags
0
BackTt Esports Poseidon Z RGB KB-PZR-KLBRUS-06
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Panel
- Flip the keyboard over.
Flip the keyboard over.
1024
Step 2
- Remove the three JIS #1 screws from the back cover.
Remove the three JIS #1 screws from the back cover.
Step 3
- Pry at these points with a plastic opening tool to unclip the two halves of the keyboard case.
Pry at these points with a plastic opening tool to unclip the two halves of the keyboard case.
Step 4
- Pull apart the two parts of the panel to expose the motherboard and keys.
Pull apart the two parts of the panel to expose the motherboard and keys.
Step 5
Keys
- Use a plastic opening tool to pry off every key.
Use a plastic opening tool to pry off every key.
Step 6
- The space, +, enter, shift, insert, and backspace keys all have metal parts which might make it a little harder to remove.
- Pull these keys to the side and up.
The space, +, enter, shift, insert, and backspace keys all have metal parts which might make it a little harder to remove.
Pull these keys to the side and up.
Step 7
Led Lights
- Since the LED lights are connected to every key, you will need to replace this whole part.
Since the LED lights are connected to every key, you will need to replace this whole part.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Hailey Cheatham
Member since: 02/21/2018
97 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
University of North Texas, Team S4-G3, Thompson Spring 2018
Member of University of North Texas, Team S4-G3, Thompson Spring 2018
UNT-THOMPSON-S18S4G3
4 Members
10 Guides authored
