The Garmin Nuvi 255W is having trouble finding a proper signal.
If you are having trouble obtaining a satellite signal, make sure your Nüvi is out of parking garages and away from tall buildings and tress. Then remain stationary for several minutes.
The power button is not functioning properly.
If your power button is stuck or cracked, follow the directions in the link shown below to learn how to properly install a new power button into your device.
Garmin Nuvi 255W power button installation
The device is unable to recharge.
If your battery does not recharge, most likely the battery has died and you need to replace it. Follow the directions in the link shown below to learn how to properly install a new battery into your device.
Garmin Nuvi 255W battery installation
First, make sure your car is turned on while you are trying to charge your nüvi. The device will not charge if the vehicle is not supplying power. Also, make sure your device is out of direct sunlight as it will only charge between 32 and 113 degrees F. If your device still won’t charge check the fuse in the power cable.
The speaker of the Garmin Nuvi 255W does not produce desired sounds.
If your speaker does not produce any sound or produces unnatural sounds, follow the directions in the link shown below to learn how to properly install a new speaker into your device.
Garmin Nuvi 255W speaker installation
This will clear all data from the device.
To clear all the data on your nüvi hold your finger on the lower-right corner fo the nüvi screen while it is turning on. Keep your finger pressed until the message appears. touch “Yes” to clear all user data.
The touch screen of the Garmin Nuvi 255W is unresponsive.
If the touch screen is unresponsive make sure that is clean. Use a soft, clean, lint-free cloth. Use water, isopropyl alcohol, or eyeglass cleaner, if needed. Apply the liquid to the cloth, and then gently wipe the touch screen.
If touch screen is not functioning properly or is defective, follow the directions in the link shown below to learn how to properly install the touch screen into your device.
Garmin Nuvi 255W touch screen installation
The Garmin Nuvi 255W cannot connect to the computer.
To get your computer to detect your nüvi, first, unplug the USB cable from your computer. Then, turn off the nüvi. Lastly, plug the USB cable into the USB port on your computer and into the nüvi. The nüvi should automatically turn on and go into USB mass storage mode. Ensure your nüvi is connected to a USB port and not a USB hub.
