Difficulty
Very easy
Steps
5
Time Required
7 minutes
Sections
1
- Tristar Blender Disassembly
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackBlender
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Tristar Blender Disassembly
- The assembled mixer.
The assembled mixer.
1024
Step 2
- To disassemble the 3 parts you’ve got to disconnect the little ring. Use a screw driver to get the ring loose.
To disassemble the 3 parts you’ve got to disconnect the little ring. Use a screw driver to get the ring loose.
Step 3
- Unscrew 3 screws to open the casing.
Unscrew 3 screws to open the casing.
Step 4
- Unscrew 4 screws to disassemble the printplate and 2 to unscrew the wiring. Then you can lift the motor out by hand.
Unscrew 4 screws to disassemble the printplate and 2 to unscrew the wiring. Then you can lift the motor out by hand.
Step 5
- To disassemble the motor holders you can slide them of the casing.
To disassemble the motor holders you can slide them of the casing.
un-screw 3 screw froms the housing
Cancel: I did not complete this guide.
Author
with 3 other contributors
koen merkx
Member since: 03/07/2018
121 Reputation
1 Guide authored
Badges:
2
Team
Delft University of Technology, Team S1-G3, Flipsen Winter 2018
Member of Delft University of Technology, Team S1-G3, Flipsen Winter 2018
TUD-FLIPSEN-W18S1G3
4 Members
1 Guide authored
