Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
1
- Rear/Front Camera
- 5 steps
Flags
2
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackTrio Stealth Pro 9.7"
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Rear/Front Camera
- Remove 2 black 4 cm Phillips screws on either side of the bottom of the device.
Remove 2 black 4 cm Phillips screws on either side of the bottom of the device.
1024
Step 2
- Use the plastic opening tools and the spudger around the outside of silver metal back plate on the device to pry off the back plate.
Use the plastic opening tools and the spudger around the outside of silver metal back plate on the device to pry off the back plate.
Step 3
- Use plastic opening tool to lift up black clip.
- Gently pull out flex cable.
Use plastic opening tool to lift up black clip.
Gently pull out flex cable.
Step 4
- Remove 3 silver 4 cm Phillips screws holding down black plastic speaker cover.
- Gently pull up on plastic to uncover clip connected to the camera.
Remove 3 silver 4 cm Phillips screws holding down black plastic speaker cover.
Gently pull up on plastic to uncover clip connected to the camera.
Step 5
- Use the tweezers and gently lift up on the clip.
- Remove the front/rear camera.
Use the tweezers and gently lift up on the clip.
Remove the front/rear camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Edward Insogna
Member since: 03/23/2015
626 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team 1-3, Miles Spring 2015
Member of UMass Dartmouth, Team 1-3, Miles Spring 2015
UMASSD-MILES-S15S1G3
3 Members
10 Guides authored
