Difficulty

Moderate

Steps

11

Time Required

                          30 minutes

Sections

2

  • Battery
  • 3 steps
  • Screen
  • 8 steps

Flags

0

  • BackTrio Stealth-Mini

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Locate the indentation at the bottom of the device.

Locate the indentation at the bottom of the device.

1024

Step 2

  • Pull on the indentation and take off the casing of the device.

Pull on the indentation and take off the casing of the device.

Step 3

  • Remove the faulty battery and insert a replacement in its slot.

Remove the faulty battery and insert a replacement in its slot.

Step 4

              Screen
  • Remove the six 2.4 mm, Phillips #0 screws circled in the image.

Remove the six 2.4 mm, Phillips #0 screws circled in the image.

Step 5

  • Remove inner casing exposing the motherboard.

Remove inner casing exposing the motherboard.

Step 6

  • Remove speakers by peeling back yelllow tape.

Remove speakers by peeling back yelllow tape.

Step 7

  • Remove ribbon cable on top of motherboard.

Remove ribbon cable on top of motherboard.

Step 8

  • Peeling back yellow tape, remove the 2.5 mm Phillips #0 screws on top of motherboard.

Peeling back yellow tape, remove the 2.5 mm Phillips #0 screws on top of motherboard.

Step 9

  • Remove the three 2.5 mm Phillips #0 screws attaching screen to main assembly.

Remove the three 2.5 mm Phillips #0 screws attaching screen to main assembly.

Step 10

  • Verify that all screws are detached from screen.

Verify that all screws are detached from screen.

Step 11

  • Detach screen from main assembly.

Detach screen from main assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Stewart Jenkins

Member since: 03/26/2018

207 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S1-G1, Harley Spring 2018                        

                                                  Member of IUPUI, Team S1-G1, Harley Spring 2018 



                    IUPUI-HARLEY-S18S1G1                     


                                            7 Members                     


                                            6 Guides authored

Nick “Blue” Wong - Jul 15, 2018

Reply

How can I do step 5? Do i need to push on the rectangle slots? It’s not very descriptive.