Difficulty
Easy
Steps
3
Time Required
Suggest a time??
Sections
2
- Back Panel
- 1 step
- Speaker
- 2 steps
Flags
1
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackTrio Stealth-10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- To remove the back panel, you will need to use a plastic opening tool and slowly separate the back panel from the device.
To remove the back panel, you will need to use a plastic opening tool and slowly separate the back panel from the device.
1024
Step 2
Speaker
- This next step will require you to solder a couple of wires off the motherboard. We recommend you get someone to help you if you are unfamiliar with soldering or use Ifixit’s Soldering guide to help you.
- Next you must solder off the wires that connect the speaker to the motherboard.
This next step will require you to solder a couple of wires off the motherboard. We recommend you get someone to help you if you are unfamiliar with soldering or use Ifixit’s Soldering guide to help you.
Next you must solder off the wires that connect the speaker to the motherboard.
Step 3
- Next you will need to remove the two screws attached to the speaker. If you have a 54 bit Driver Kit use the Philips Head 0 (or PH 0) head to remove the two 4mm screws.
Next you will need to remove the two screws attached to the speaker. If you have a 54 bit Driver Kit use the Philips Head 0 (or PH 0) head to remove the two 4mm screws.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Daniel Coleman
Member since: 10/29/2015
640 Reputation
5 Guides authored
Badges:
16
+13 more badges
Team
UMass Dartmouth, Team 1-4, Miles Fall 2015
Member of UMass Dartmouth, Team 1-4, Miles Fall 2015
UMASSD-MILES-F15S1G4
3 Members
12 Guides authored