Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

2

  • Back Panel
  • 1 step
  • Battery
  • 3 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackTrio Stealth-10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • To remove the back panel, you will need to use a plastic opening tool and slowly separate the back panel from the device.

To remove the back panel, you will need to use a plastic opening tool and slowly separate the back panel from the device.

1024

Step 2

              Battery
  • This step will require soldering. If you are unfamiliar with soldering then we recommend that you get help from another person or use the soldering guide made by Ifixit to help.
  • Solder the connections off for the battery.

This step will require soldering. If you are unfamiliar with soldering then we recommend that you get help from another person or use the soldering guide made by Ifixit to help.

Solder the connections off for the battery.

Step 3

  • Disconnect the screen/digitizer connection. Use tweezers and pull each grey end of the connection until there is a small gap between the grey and white on the connector to the motherboard. The connection should be easily removable.
  • Pull the cable away and clear from under the battery to avoid damage to the connection.

Disconnect the screen/digitizer connection. Use tweezers and pull each grey end of the connection until there is a small gap between the grey and white on the connector to the motherboard. The connection should be easily removable.

Pull the cable away and clear from under the battery to avoid damage to the connection.

Step 4

  • Pry battery up from adhesive. Use a type of adhesive remover. Nail polish remover works well.

Pry battery up from adhesive. Use a type of adhesive remover. Nail polish remover works well.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 5 other contributors 


                    Daniel Coleman

Member since: 10/29/2015

640 Reputation

                                      5 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       UMass Dartmouth, Team 1-4, Miles Fall 2015                        

                                                  Member of UMass Dartmouth, Team 1-4, Miles Fall 2015 



                    UMASSD-MILES-F15S1G4                     


                                            3 Members                     


                                            12 Guides authored