Trio Axs 3G Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Back Case
3 steps
Camera
4 steps

Flags

BackTrio AXS 3G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Case

On the back of the device there is a white SD card case that shelters the screws that attach the back panel to the tablet.
Use your thumbs to slide up and off the small SD card case.

On the back of the device there is a white SD card case that shelters the screws that attach the back panel to the tablet.

Use your thumbs to slide up and off the small SD card case.

1024

Step 2

Using the Phillips Head #000, unscrew the 5 4mm and 3mm screws at the top.

Using the Phillips Head #000, unscrew the 5 4mm and 3mm screws at the top.

Step 3

Insert a plastic opening tool between the back panel and the front of the tablet, and gently pry it away from the tablet.
Do not pry too hard as the screen is fragile and might crack.
It is best to start at the bottom of the tablet when prying the back panel off.
The volume piece will also dislodge when the back panel is removed.

Insert a plastic opening tool between the back panel and the front of the tablet, and gently pry it away from the tablet.

Do not pry too hard as the screen is fragile and might crack.

It is best to start at the bottom of the tablet when prying the back panel off.

The volume piece will also dislodge when the back panel is removed.

Step 4

              Camera

Unscrew 5 #000 4 mm and 3 mm screws around the strip.

Unscrew 5 #000 4 mm and 3 mm screws around the strip.

Step 5

Undo the tape on top of the connector from the camera to motherboard.

Undo the tape on top of the connector from the camera to motherboard.

Step 6

Slightly lift up the motherboard.

Slightly lift up the motherboard.

Step 7

Disconnect the camera from the motherboard on the topside and pull the camera strip out.

Disconnect the camera from the motherboard on the topside and pull the camera strip out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Javoy Ross

Member since: 09/20/2017

316 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of North Texas, Team S7-G6, Thomas Fall 2017                        

                                                  Member of University of North Texas, Team S7-G6, Thomas Fall 2017 



                    UNT-THOMAS-F17S7G6                     


                                            3 Members                     


                                            12 Guides authored

Amanda Springsteen - Mar 10, 2018

Where can I get the camera?

Introduction#

What you need#

Team#

Introduction

What you need

Team