Difficulty

Moderate

Steps

7

Time Required

                          15 - 30 minutes

Sections

2

  • Back Case
  • 3 steps
  • Battery
  • 4 steps

Flags

0

  • BackTrio AXS 3G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case
  • On the back of the device there is a white SD card case that shelters the screws that attach the back panel to the tablet.
  • Use your thumbs to slide up and off the small SD card case.

On the back of the device there is a white SD card case that shelters the screws that attach the back panel to the tablet.

Use your thumbs to slide up and off the small SD card case.

1024

Step 2

  • Using the Phillips Head #000, unscrew the 5 4mm and 3mm screws at the top.

Using the Phillips Head #000, unscrew the 5 4mm and 3mm screws at the top.

Step 3

  • Insert a plastic opening tool between the back panel and the front of the tablet, and gently pry it away from the tablet.
  • Do not pry too hard as the screen is fragile and might crack.
  • It is best to start at the bottom of the tablet when prying the back panel off.
  • The volume piece will also dislodge when the back panel is removed.

Insert a plastic opening tool between the back panel and the front of the tablet, and gently pry it away from the tablet.

Do not pry too hard as the screen is fragile and might crack.

It is best to start at the bottom of the tablet when prying the back panel off.

The volume piece will also dislodge when the back panel is removed.

Step 4

              Battery
  • The battery is the large, silver square inside the tablet. It is connected to the motherboard by two wires.

The battery is the large, silver square inside the tablet. It is connected to the motherboard by two wires.

Step 5

  • Use the soldering iron to remove the two metal ends that connect the battery to the motherboard.

Use the soldering iron to remove the two metal ends that connect the battery to the motherboard.

Step 6

  • Use the plastic card to pry the battery away from the device.
  • The battery is attached to the tablet by glue.

Use the plastic card to pry the battery away from the device.

The battery is attached to the tablet by glue.

Step 7

  • Peel off the battery from the device to completely remove it.

Peel off the battery from the device to completely remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Michaela Causey

Member since: 09/20/2017

328 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       University of North Texas, Team S7-G6, Thomas Fall 2017                        

                                                  Member of University of North Texas, Team S7-G6, Thomas Fall 2017 



                    UNT-THOMAS-F17S7G6                     


                                            3 Members                     


                                            12 Guides authored

millie abanilla - Aug 12, 2020

Reply

where can i buy a battery replacement? can it work without a battery?

J W - Jul 25, 2022

Reply

where can you buy a replacement battery