Triace A310 Disk Brake Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

Tire
3 steps
Disk Brake
3 steps

Flags

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Better Introduction

Improve this guide by completing or revising its introduction.

BackTriace A310
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Tire

Begin loosening the tire by turning the quick release handle.

Begin loosening the tire by turning the quick release handle.

1024

Step 2

Gripping the rear derailleur, pull the arm back, away from the front of the bike.
Notice how the derailleur becomes almost vertical in the second picture when compared to the first.

Gripping the rear derailleur, pull the arm back, away from the front of the bike.

Notice how the derailleur becomes almost vertical in the second picture when compared to the first.

Step 3

There should be enough slack, in the chain, at this point to remove the tire from the bike.
Note: You may need to wiggle the tire and chain around in order to create enough slack.
Remove the tire from the bike.

There should be enough slack, in the chain, at this point to remove the tire from the bike.

Note: You may need to wiggle the tire and chain around in order to create enough slack.

Remove the tire from the bike.

Step 4

              Disk Brake

Place the tire flat on the ground making sure the disk is facing you.

Place the tire flat on the ground making sure the disk is facing you.

Step 5

Using the modular screw driver with a T25 bit, begin loosening and then removing the six 10mm-long screws.
Make sure to keep track of all of the removed pieces.

Using the modular screw driver with a T25 bit, begin loosening and then removing the six 10mm-long screws.

Make sure to keep track of all of the removed pieces.

Step 6

After all of the screws have been removed, take the disk and pull it away from the tire.

After all of the screws have been removed, take the disk and pull it away from the tire.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors

                    Daniel

Member since: 01/27/2014

222 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Cal Poly, Team 1-37, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 1-37, Maness Winter 2014 



                    CPSU-MANESS-W14S1G37                     


                                            4 Members                     


                                            10 Guides authored

Inconsistent Images#

Better Introduction#

Introduction#

What you need#

Team#

Inconsistent Images

Better Introduction

Introduction

What you need

Team