Difficulty

Easy

Steps

4

Time Required

                          5 minutes

Sections

1

  • Tail Light Mounting Bracket
  • 4 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackTrek 820

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Tail Light Mounting Bracket
  • Obtain one tail light mounting bracket and one screw as shown in the picture.
  • The screw should be removed from the mounting bracket.

Obtain one tail light mounting bracket and one screw as shown in the picture.

The screw should be removed from the mounting bracket.

1024

Step 2

  • Clean the bicycle seat post and mounting bracket.
  • Wrap the mounting bracket strap around the seat post.
  • Verify the larger piece rests towards the tail end aligned with the tires.
  • Verify the bracket’s screw hole is on the right side of the bicycle.

Clean the bicycle seat post and mounting bracket.

Wrap the mounting bracket strap around the seat post.

Verify the larger piece rests towards the tail end aligned with the tires.

Verify the bracket’s screw hole is on the right side of the bicycle.

Step 3

  • Locate the slot on the bracket where the strap will be inserted.
  • Insert the strap into the slot.
  • Tighten the strap just enough to keep the bracket in place.

Locate the slot on the bracket where the strap will be inserted.

Insert the strap into the slot.

Tighten the strap just enough to keep the bracket in place.

Step 4

  • Insert the screw into the bracket screw hole.
  • Tighten the screw with fingers until the mounting bracket rests freely on seat post.

Insert the screw into the bracket screw hole.

Tighten the screw with fingers until the mounting bracket rests freely on seat post.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Kaveh Karimiyanha

Member since: 09/24/2012

807 Reputation

                                      7 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 1-1, Propen Fall 2012                        

                                                  Member of Cal Poly, Team 1-1, Propen Fall 2012 



                    CPSU-PROPEN-F12S1G1                     


                                            5 Members                     


                                            9 Guides authored