Toy Windmill Repair Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          6 - 7 hours            

Sections

1

• Toy Windmill Repair
• 6 steps

Flags

Missed a Step

Oops! This guide is currently missing some important steps.

• BackToy

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

It should be noted that the steps outlined in this section should also apply to other gadgets similar in construction; the use of the windmill is an example and an ideal template when restoring other similar gadgets.

What you need

Step 1

              Toy Windmill Repair               

• Use the 120 grit sandpaper to remove any rough edges on both the base unit and any parts which need to be connected to it.

Use the 120 grit sandpaper to remove any rough edges on both the base unit and any parts which need to be connected to it.

1024

Step 2

• Use the rough sandpaper on parts that need to be connected to the primary unit as this will result in greater surface contact.

Use the rough sandpaper on parts that need to be connected to the primary unit as this will result in greater surface contact.

Step 3

• Apply a small amount of wood glue to each end.
• Connect the two pieces and apply a small amount of masking tape to hold them in place.

Apply a small amount of wood glue to each end.

Connect the two pieces and apply a small amount of masking tape to hold them in place.

Step 4

• Once all the pieces have been connected and the glue has cured, use the fine sandpaper to smooth out the connected pieces.

Once all the pieces have been connected and the glue has cured, use the fine sandpaper to smooth out the connected pieces.

Step 5

• Using the fill stick crayon, blend in the connected pieces.
• This will require the reader to be creative.

Using the fill stick crayon, blend in the connected pieces.

This will require the reader to be creative.

Step 6

• Apply a small amount of wood glue to each end of the windmill.
• Connect the two pieces and apply a small amount of masking tape to hold the two ends in place.

Apply a small amount of wood glue to each end of the windmill.

Connect the two pieces and apply a small amount of masking tape to hold the two ends in place.

To reassemble your device, follow these instructions in order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Karim Ladha                     

Member since: 06/27/2021

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S2-G15, Melo-Thaiss Summer 2021                        

                                                  Member of York University, Team S2-G15, Melo-Thaiss Summer 2021 



                    YORK-MELO-THAISS-SU21S2G15                     


                                            1 Member                     


                                            1 Guide authored