Difficulty
Moderate
Steps
6
Time Required
3 - 4 hours
Sections
1
- Battery
- 6 steps
Flags
0
BackLightsaber
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the Lightsaber blade by carefully twisting it off the hilt.
- Be gentle during this process to avoid damaging the blade or the hilt.
Remove the Lightsaber blade by carefully twisting it off the hilt.
Be gentle during this process to avoid damaging the blade or the hilt.
1024
Step 2
- Use a Phillips #2 screwdriver to remove the 3.5 mm screws on the hilt.
Use a Phillips #2 screwdriver to remove the 3.5 mm screws on the hilt.
Step 3
- Remove the old C batteries.
- If the batteries were leaking, be sure you thoroughly clean the inside of the hilt with a pair of tweezers to scrape off the battery acid and wipe away any acid that remains with a tissue or napkin.
- Battery acid is toxic and dangerous for your health. Wear gloves to protect yourself.
Remove the old C batteries.
If the batteries were leaking, be sure you thoroughly clean the inside of the hilt with a pair of tweezers to scrape off the battery acid and wipe away any acid that remains with a tissue or napkin.
Battery acid is toxic and dangerous for your health. Wear gloves to protect yourself.
Step 4
- Place the new C batteries inside the newly cleaned hilt.
Place the new C batteries inside the newly cleaned hilt.
Step 5
- Use your Philips #2 screwdriver to screw the 3.5 mm screws back into the hilt.
Use your Philips #2 screwdriver to screw the 3.5 mm screws back into the hilt.
Step 6
- Lastly, twist the Lightsaber blade back on top of the hilt.
- Press the red button on the hilt to test if the blade glows.
- If the blade doesn’t glow, start over and try again with different C batteries.
Lastly, twist the Lightsaber blade back on top of the hilt.
Press the red button on the hilt to test if the blade glows.
If the blade doesn’t glow, start over and try again with different C batteries.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Zachary Adaes
Member since: 03/22/2021
133 Reputation
1 Guide authored
Badges:
3
Team
UMass Dartmouth, Team S3-G1, Saloman Spring 2021
Member of UMass Dartmouth, Team S3-G1, Saloman Spring 2021
UMASSD-SALOMAN-S21S3G1
1 Member
1 Guide authored