Totalpond Pond Pump Impeller Spindle Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

• Impeller Spindle
• 5 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackTotalPond Pond Pump

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Step 1

              Impeller Spindle               

• Hold the inlet screen and rotate it counterclockwise to unscrew it. It is helpful to remove the inlet screen so that it is not damaged during the replacement process.

Hold the inlet screen and rotate it counterclockwise to unscrew it. It is helpful to remove the inlet screen so that it is not damaged during the replacement process.

1024

Step 2

• Firmly hold the pump block with one hand and the impeller housing with the other hand. Rotate impeller housing counterclockwise until it is released.

Firmly hold the pump block with one hand and the impeller housing with the other hand. Rotate impeller housing counterclockwise until it is released.

Step 3

• Remove the rubber stop that is attached to the tube that runs through the middle of the impeller. Also remove the bearing that is between the stop and the impeller.

Remove the rubber stop that is attached to the tube that runs through the middle of the impeller. Also remove the bearing that is between the stop and the impeller.

Step 4

• Hold the impeller cover with one hand and the impeller with the other. Slide the impeller out.

Hold the impeller cover with one hand and the impeller with the other. Slide the impeller out.

Step 5

• Hold the impeller spindle and wiggle it side to side until it detaches from the impeller cover.

Hold the impeller spindle and wiggle it side to side until it detaches from the impeller cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Nicole Santana                     

Member since: 01/13/2015

597 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team 3-6, Hickman Winter 2015                        

                                                  Member of USF Tampa, Team 3-6, Hickman Winter 2015 



                    USFT-HICKMAN-W15S3G6                     


                                            4 Members                     


                                            5 Guides authored                     

rz22g - Jun 22, 2015

Reply

The part number of the spindle itself would probably be a good idea to included in this guide.