Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Impeller
- 4 steps
Flags
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
BackTotalPond Pond Pump
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Impeller
- Hold the inlet screen and rotate it counterclockwise to unscrew it. It is helpful to remove the inlet screen so that it is not damaged during the replacement process.
Hold the inlet screen and rotate it counterclockwise to unscrew it. It is helpful to remove the inlet screen so that it is not damaged during the replacement process.
1024
Step 2
- Firmly hold the pump block with one hand and the impeller housing with the other hand. Rotate impeller housing counterclockwise until it is released.
Firmly hold the pump block with one hand and the impeller housing with the other hand. Rotate impeller housing counterclockwise until it is released.
Step 3
- Remove the rubber stop that is attached to the tube that runs through the middle of the impeller. Also remove the bearing that is between the stop and the impeller.
Remove the rubber stop that is attached to the tube that runs through the middle of the impeller. Also remove the bearing that is between the stop and the impeller.
Step 4
- Hold the impeller cover with one hand and the impeller with the other. Slide the impeller out.
Hold the impeller cover with one hand and the impeller with the other. Slide the impeller out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Nicole Santana
Member since: 01/13/2015
597 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team 3-6, Hickman Winter 2015
Member of USF Tampa, Team 3-6, Hickman Winter 2015
USFT-HICKMAN-W15S3G6
4 Members
5 Guides authored