Difficulty

Easy

Steps

9

Time Required

                          5 minutes

Sections

3

  • Back Panel
  • 2 steps
  • Battery
  • 5 steps
  • RAM
  • 2 steps

Flags

0

  • BackToshiba Tecra Z50-A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Turn off the laptop.
  • Flip the laptop over so the bottom is facing upwards and the hinges are closest to you.
  • Remove the fifteen 5 mm screws from the back panel using a Phillips #0 screwdriver.

Turn off the laptop.

Flip the laptop over so the bottom is facing upwards and the hinges are closest to you.

Remove the fifteen 5 mm screws from the back panel using a Phillips #0 screwdriver.

1024

Step 2

  • Lift up back panel using your hands and remove it from the rest of the laptop.

Lift up back panel using your hands and remove it from the rest of the laptop.

Step 3

              Battery
  • Lift the plastic covering over the battery plug.

Lift the plastic covering over the battery plug.

Step 4

  • Pull the wired cable up towards the top of the laptop to disconnect it from its socket on the motherboard.

Pull the wired cable up towards the top of the laptop to disconnect it from its socket on the motherboard.

Step 5

  • Remove the single 2 mm screw from the corner of the laptop using a Phillips #0 screwdriver.

Remove the single 2 mm screw from the corner of the laptop using a Phillips #0 screwdriver.

Step 6

  • Remove the three 3 mm screws from the battery using a Phillips #0 screwdriver.

Remove the three 3 mm screws from the battery using a Phillips #0 screwdriver.

Step 7

  • Lift up on the battery with your hands and remove it from the laptop.

Lift up on the battery with your hands and remove it from the laptop.

Step 8

              RAM
  • Pull the two retention clips outwards.

Pull the two retention clips outwards.

Step 9

  • Pull up on the RAM module at a 45 degree angle.

Pull up on the RAM module at a 45 degree angle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Luis Juen Baez

Member since: 10/25/2021

585 Reputation

                                      4 Guides authored                  



                       Badges:
                       5





                                                        +2 more badges

Team

                       UMass Dartmouth, Team 2-4, Sinclaire Fall 2021                        

                                                  Member of UMass Dartmouth, Team 2-4, Sinclaire Fall 2021 



                    UMASSD-SINCLAIRE-F21S2G4                     


                                            3 Members                     


                                            14 Guides authored