Difficulty
Moderate
Steps
11
Time Required
1 hour
Sections
1
- Fuse
- 11 steps
Flags
0
BackToshiba TDP-XP2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Fuse
- Start by removing the two screws on the bottom of the device as shown.
Start by removing the two screws on the bottom of the device as shown.
1024
Step 2
- Remove the top plastic cover from the device. The back is snapped on so it would help to have leverage from a prying tool.
- Remove the ribbon cable attached to the plastic piece just removed. Remember its orientation for re-assembling later.
Remove the top plastic cover from the device. The back is snapped on so it would help to have leverage from a prying tool.
Remove the ribbon cable attached to the plastic piece just removed. Remember its orientation for re-assembling later.
Step 3
- Remove the screws from the case located around the device.
Remove the screws from the case located around the device.
Step 4
- Remove the plastic panels from the body.
Remove the plastic panels from the body.
Step 5
- Remove the screws from the IO panel.
- Pull up on the panel and remove it.
Remove the screws from the IO panel.
Pull up on the panel and remove it.
Step 6
- Unscrew the screws from the metal shielding to remove it.
Unscrew the screws from the metal shielding to remove it.
Step 7
- Remove cables from motherboard.
- Unscrew motherboard and remove from device.
Remove cables from motherboard.
Unscrew motherboard and remove from device.
Step 8
- Remove the cable from the bottom of the motherboard to fully remove it.
Remove the cable from the bottom of the motherboard to fully remove it.
Step 9
- Unscrew the power adapter on the back.
Unscrew the power adapter on the back.
Step 10
- Remove cables from the power supply board.
- Remove the screws located around the board to un-mount it.
Remove cables from the power supply board.
Remove the screws located around the board to un-mount it.
Step 11
- Locate the fuse near where the power adapter was.
- De-solder the fuse and replace with an equivalent fuse (Fuse leads to de-solder are marked in red).
Locate the fuse near where the power adapter was.
De-solder the fuse and replace with an equivalent fuse (Fuse leads to de-solder are marked in red).
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Bryan Underwood
Member since: 04/02/2018
697 Reputation
5 Guides authored
Badges:
3
Team
University of Memphis, Team S1-G3, Kim Spring 2018
Member of University of Memphis, Team S1-G3, Kim Spring 2018
UM-KIM-S18S1G3
3 Members
5 Guides authored