Difficulty
Moderate
Steps
11
Time Required
10 minutes
Sections
4
- Top Panel
- 3 steps
- Front Panel
- 3 steps
- Front Flap Tray Door
- 3 steps
- Front Flap Tray Door Spring
- 2 steps
Flags
0
BackToshiba SD-K740
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Top Panel
- Unplug the DVD player before beginning.
- Remove the three 7.7 mm screws from the back panel using a Phillips #0 screwdriver.
Unplug the DVD player before beginning.
Remove the three 7.7 mm screws from the back panel using a Phillips #0 screwdriver.
1024
Step 2
- Turn the DVD player on its side.
- Remove the 7.7 mm screw.
- Flip the DVD player onto its other side.
- Remove the 7.7 mm screw.
Turn the DVD player on its side.
Remove the 7.7 mm screw.
Flip the DVD player onto its other side.
Step 3
- Flip the DVD player over onto its front face.
- Remove the back panel by lifting up and pulling it towards yourself.
Flip the DVD player over onto its front face.
Remove the back panel by lifting up and pulling it towards yourself.
Step 4
Front Panel
- Flip the DVD player so its top is sitting on your working surface.
- Lift and push away the two tabs located in the middle of the player.
- The front panel will not detach during this step, so do not force it.
Flip the DVD player so its top is sitting on your working surface.
Lift and push away the two tabs located in the middle of the player.
The front panel will not detach during this step, so do not force it.
Step 5
- Flip the DVD player on its side.
- Lift and slide forward the single tab on the side.
- The front panel will not detach during this step, so do not force it.
Flip the DVD player on its side.
Lift and slide forward the single tab on the side.
Step 6
- Grasp the front panel and pull forward to your right to remove it.
Grasp the front panel and pull forward to your right to remove it.
Step 7
Front Flap Tray Door
- On back side of front panel very carefully apply pressure to the left hand side of the flap hinge.
- There is just enough tolerance in the plastic to allow removal, be careful of brittle plastic.
On back side of front panel very carefully apply pressure to the left hand side of the flap hinge.
There is just enough tolerance in the plastic to allow removal, be careful of brittle plastic.
Step 8
- Once the peg is free from the left restraint, carefully remove the left part of the flap.
- Carefully remove the right peg from the restraint.
- Do not pull away from the front panel because the spring is still attached.
- Do not force the plastic.
Once the peg is free from the left restraint, carefully remove the left part of the flap.
Carefully remove the right peg from the restraint.
Do not pull away from the front panel because the spring is still attached.
Do not force the plastic.
Step 9
- Remove the spring from the end of the right peg by pulling the door away from the spring.
- Do not pull away from the front panel until the spring has been removed from the flap.
Remove the spring from the end of the right peg by pulling the door away from the spring.
Do not pull away from the front panel until the spring has been removed from the flap.
Step 10
Front Flap Tray Door Spring
- Remove the .384 inch screw holding the spring to front panel.
Remove the .384 inch screw holding the spring to front panel.
Step 11
- Slide the spring off of the underlying peg.
Slide the spring off of the underlying peg.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
John Lokker
Member since: 01/20/2011
324 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 1-16, Amido Winter 2011
Member of Cal Poly, Team 1-16, Amido Winter 2011
CPSU-AMIDO-W11S1G16
4 Members
8 Guides authored
ali - Jun 12, 2022
Reply
Thanks for sharing,
It’s very informative for me, I really enjoy this content.
I also have Content about door spring replacement
Cheers.
ozee garage - Jun 20, 2022
Reply
Great Article’s content. Its worth reading. What type of auto gate repair is best for you? Find out by comparing repair services, prices and tech info. If you’re in need of automatic gate repair, <a href=“https://www.ozgaragedoorsandgates.com/"#...>Oz Garage Doors And Gates can be a solution.
nature nut - Jun 27, 2022
Reply
I got wonderful content after reading your article. Thankyou for information. Find out by comparing repair services, prices and tech info. If you’re in need of automatic gate repair, <a href=“http://elitecommercialgaterepairs.com/"#/>Elite Commercial Gate Repairs can be a solution.
georgia oscar - Jun 28, 2022
Reply
Thanks for this Article! If anyone looking for a platform which provide services of repairing ad installation doors. <a href=“https://http://powermastergateopenerrepair.com/”…>Power Master Gate Opener Repair Specialist can be a solution.
Ella Swan - Jun 28, 2022
Reply
Thanks for sharing us this informative article. If you’re in need of automatic gate repair, <a href=“https://http://miamioverheadgaterepair.com/”#/>Miami Overhead Gate Repair can be a solution.