Toshiba Satellite S55T C5225 Screen Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

16

Time Required

                          15 - 30 minutes            

Sections

4

• Battery
• 3 steps
• Back Panel
• 3 steps
• Speakers
• 4 steps
• Screen Assembly
• 6 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackToshiba Satellite S55t-C5225

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Shut down the computer and disconnect all cables
• Flip the computer over so the bottom is facing up.

Shut down the computer and disconnect all cables

Flip the computer over so the bottom is facing up.

1024

Step 2

• Remove the two 7.0 mm Phillips #0 screws that hold the battery in place.

Remove the two 7.0 mm Phillips #0 screws that hold the battery in place.

Step 3

• Carefully remove the battery by wedging a plastic opening tool in-between the battery and back cover.

Carefully remove the battery by wedging a plastic opening tool in-between the battery and back cover.

Step 4

              Back Panel               

• Remove the eleven 7.0 mm Phillips #0 screws that secure the back cover.

Remove the eleven 7.0 mm Phillips #0 screws that secure the back cover.

Step 5

• Wedge the tip of a plastic opening tool between the back cover and metal frame.
• Twist the plastic tool, while wedged, to release the retaining tabs from the frame.
• Repeat these steps around the laptop to release all retaining tabs.

Wedge the tip of a plastic opening tool between the back cover and metal frame.

Twist the plastic tool, while wedged, to release the retaining tabs from the frame.

Repeat these steps around the laptop to release all retaining tabs.

Step 6

• Once all retaining tabs are released, pull up on the cover to remove.

Once all retaining tabs are released, pull up on the cover to remove.

Step 7

              Speakers               

• Disconnect the power button strip by flipping up the white plastic clamp that connects it to the motherboard.
• Pull the ribbon wire out from plastic clamp.

Disconnect the power button strip by flipping up the white plastic clamp that connects it to the motherboard.

Pull the ribbon wire out from plastic clamp.

Step 8

• Remove the four 10.0 mm Phillips #0 screws that hold the speakers in place.

Remove the four 10.0 mm Phillips #0 screws that hold the speakers in place.

Step 9

• Follow the black wire that connects the speakers to the motherboard.
• Pull the wire out from its socket to disconnect the speakers from the motherboard.

Follow the black wire that connects the speakers to the motherboard.

Pull the wire out from its socket to disconnect the speakers from the motherboard.

Step 10

• Lift speakers up from their mounted position to remove.

Lift speakers up from their mounted position to remove.

Step 11

              Screen Assembly               

• Disconnect LAN from the motherboard power wire. Pop up the white clamp that holds it in place, then pull the wire out.

Disconnect LAN from the motherboard power wire. Pop up the white clamp that holds it in place, then pull the wire out.

Step 12

• Disconnect the two cables connecting the screen assembly to the WIFI card.

Disconnect the two cables connecting the screen assembly to the WIFI card.

Step 13

• Disconnect all remaining cables that connect the screen assembly to the motherboard.

Disconnect all remaining cables that connect the screen assembly to the motherboard.

Step 14

Step 15

• Remove the four 7.0 mm Phillips #0 screws on both ends of the laptop that attach the screen assembly to the laptop.

Remove the four 7.0 mm Phillips #0 screws on both ends of the laptop that attach the screen assembly to the laptop.

Step 16

• Slowly open laptop while the bottom is facing up. Begin to separate the bottom of laptop from the screen assembly brackets.
• Remove the screen assembly.

Slowly open laptop while the bottom is facing up. Begin to separate the bottom of laptop from the screen assembly brackets.

Remove the screen assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Javien Delgado                     

Member since: 10/21/2019

217 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team S1-G5, Botvin Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G5, Botvin Fall 2019 



                    UMASSD-BOTVIN-F19S1G5                     


                                            3 Members                     


                                            11 Guides authored