Difficulty
Moderate
Steps
6
Time Required
5 - 10 minutes
Sections
2
- Battery
- 3 steps
- Back Panel
- 3 steps
Flags
0
BackToshiba Satellite S55t-C5225
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Shut down the computer and disconnect all cables
- Flip the computer over so the bottom is facing up.
Shut down the computer and disconnect all cables
Flip the computer over so the bottom is facing up.
1024
Step 2
- Remove the two 7.0 mm Phillips #0 screws that hold the battery in place.
Remove the two 7.0 mm Phillips #0 screws that hold the battery in place.
Step 3
- Carefully remove the battery by wedging a plastic opening tool in-between the battery and back cover.
Carefully remove the battery by wedging a plastic opening tool in-between the battery and back cover.
Step 4
Back Panel
- Remove the eleven 7.0 mm Phillips #0 screws that secure the back cover.
Remove the eleven 7.0 mm Phillips #0 screws that secure the back cover.
Step 5
- Wedge the tip of a plastic opening tool between the back cover and metal frame.
- Twist the plastic tool, while wedged, to release the retaining tabs from the frame.
- Repeat these steps around the laptop to release all retaining tabs.
Wedge the tip of a plastic opening tool between the back cover and metal frame.
Twist the plastic tool, while wedged, to release the retaining tabs from the frame.
Repeat these steps around the laptop to release all retaining tabs.
Step 6
- Once all retaining tabs are released, pull up on the cover to remove.
Once all retaining tabs are released, pull up on the cover to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Sarah Westberg
Member since: 03/11/2019
16,818 Reputation
65 Guides authored
Badges:
38
+35 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,769 Guides authored
