Toshiba Satellite S55T B5335 Wi Fi Adapter Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          6 minutes            

Sections

3

• Battery
• 2 steps
• Bottom Cover
• 3 steps
• Wi-Fi Adapter
• 3 steps

Flags

0

• BackToshiba Satellite S55T-B5335

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the two 7 mm Phillips #1 screws that hold the battery in place.

Remove the two 7 mm Phillips #1 screws that hold the battery in place.

1024

Step 2

• Pull the battery from laptop.

Pull the battery from laptop.

Step 3

              Bottom Cover               

• Remove the ten 7 mm Phillips #1 screws that secure the back cover.

Remove the ten 7 mm Phillips #1 screws that secure the back cover.

Step 4

• Wedge the tip of a plastic opening tool between the back cover and the metal frame.
• Twist the plastic opening tool, while wedged, in order to release the retaining tabs from the frame.
• Repeat these steps in a circular pattern around the laptop to release all retaining tabs.

Wedge the tip of a plastic opening tool between the back cover and the metal frame.

Twist the plastic opening tool, while wedged, in order to release the retaining tabs from the frame.

Repeat these steps in a circular pattern around the laptop to release all retaining tabs.

Step 5

• Once all retaining tabs are released from the frame, you can pull up on the back cover to remove it.

Once all retaining tabs are released from the frame, you can pull up on the back cover to remove it.

Step 6

              Wi-Fi Adapter               

• Using the pointed end of the Spudger, gently disconnect the antenna (white and black wires) from the Wi-Fi adapter.

Using the pointed end of the Spudger, gently disconnect the antenna (white and black wires) from the Wi-Fi adapter.

Step 7

• Remove the single 4 mm Phillips #1 screw holding the Wi-Fi adapter in place.

Remove the single 4 mm Phillips #1 screw holding the Wi-Fi adapter in place.

Step 8

• While grabbing the Wi-Fi adapter on both sides, gently pull away from the socket in the direction of the removed screw.

While grabbing the Wi-Fi adapter on both sides, gently pull away from the socket in the direction of the removed screw.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    George Gillespie                     

Member since: 09/15/2016

721 Reputation

                                      7 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team 2-1, Blackwell Fall 2016                        

                                                  Member of USF Tampa, Team 2-1, Blackwell Fall 2016 



                    USFT-BLACKWELL-F16S2G1                     


                                            4 Members                     


                                            7 Guides authored                     

Any Where - May 22, 2017

Reply

George, do you know where the graphics chip is at on that motherboard?