Difficulty
Easy
Steps
4
Time Required
6 minutes
Sections
2
- Battery
- 2 steps
- RAM
- 2 steps
Flags
0
BackToshiba Satellite S50-B
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure you turn off the laptop first.
- Unscrew the two 6.5mm screws below the battery using a Phillips #0 Screwdriver.
Make sure you turn off the laptop first.
Unscrew the two 6.5mm screws below the battery using a Phillips #0 Screwdriver.
1024
Step 2
- Place thumbs on corners of the battery. Pinch the battery between the thumb and index finger and pull.
Place thumbs on corners of the battery. Pinch the battery between the thumb and index finger and pull.
Step 3
RAM
- Unscrew all 6.5mm screws on the bottom of the laptop using a Phillips #0 Screwdriver
- Using the plastic opening tools, open the back cover and remove it from the laptop.
Unscrew all 6.5mm screws on the bottom of the laptop using a Phillips #0 Screwdriver
Using the plastic opening tools, open the back cover and remove it from the laptop.
Step 4
- Push down on the clips on either side of the RAM stick evenly.
- Pull out the RAM stick. Make sure the notches on the RAM stick align with the notches in the RAM holder.
Push down on the clips on either side of the RAM stick evenly.
Pull out the RAM stick. Make sure the notches on the RAM stick align with the notches in the RAM holder.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 5 other contributors
Eric Sun
Member since: 10/17/2017
144 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
UC Santa Barbara, Team S1-G4, Weedon Fall 2017
Member of UC Santa Barbara, Team S1-G4, Weedon Fall 2017
UCSB-WEEDON-F17S1G4
5 Members
4 Guides authored
