Difficulty
Moderate
Steps
4
Time Required
8 minutes
Sections
2
- Battery
- 2 steps
- Hard Drive
- 2 steps
Flags
0
BackToshiba Satellite S50-B
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure you turn off the laptop first.
- Unscrew the two 6.5mm screws below the battery using a Phillips #0 Screwdriver.
Make sure you turn off the laptop first.
Unscrew the two 6.5mm screws below the battery using a Phillips #0 Screwdriver.
1024
Step 2
- Place thumbs on corners of the battery. Pinch the battery between the thumb and index finger and pull.
Place thumbs on corners of the battery. Pinch the battery between the thumb and index finger and pull.
Step 3
Hard Drive
- Locate the 12 screws on the bottom of the device. Unscrew using a Phillips screwdriver, and set screws aside.
- Use a plastic opening tool to remove bottom casing.
Locate the 12 screws on the bottom of the device. Unscrew using a Phillips screwdriver, and set screws aside.
Use a plastic opening tool to remove bottom casing.
Step 4
- Use the plastic casing over the hard drive to lift the hard drive up.
- Once hard drive is slightly lifted up, make sure the laptop is in correct orientation with the battery away from you, and pull the hard drive towards right.
Use the plastic casing over the hard drive to lift the hard drive up.
Once hard drive is slightly lifted up, make sure the laptop is in correct orientation with the battery away from you, and pull the hard drive towards right.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 6 other contributors
Victoria Murillo
Member since: 10/17/2017
143 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
UC Santa Barbara, Team S1-G4, Weedon Fall 2017
Member of UC Santa Barbara, Team S1-G4, Weedon Fall 2017
UCSB-WEEDON-F17S1G4
5 Members
4 Guides authored