Difficulty

Moderate

Steps

4

Time Required

                          10 - 15 minutes            

Sections

2

  • Battery
  • 2 steps
  • Cooling Fan
  • 2 steps

Flags

0

  • BackToshiba Satellite S50-B

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Make sure you turn off the laptop first.
  • Unscrew the two 6.5mm screws below the battery using a Phillips #0 Screwdriver.

Make sure you turn off the laptop first.

Unscrew the two 6.5mm screws below the battery using a Phillips #0 Screwdriver.

1024

Step 2

  • Place thumbs on corners of the battery. Pinch the battery between the thumb and index finger and pull.

Place thumbs on corners of the battery. Pinch the battery between the thumb and index finger and pull.

Step 3

              Cooling Fan               
  • Locate the 10 screws on the bottom of the device, there should be 12 screws in total including the battery screws. Unscrew using a Phillips #0 screwdriver, and set screws aside.
  • Use a plastic opening tool to remove the bottom panel.

Locate the 10 screws on the bottom of the device, there should be 12 screws in total including the battery screws. Unscrew using a Phillips #0 screwdriver, and set screws aside.

Use a plastic opening tool to remove the bottom panel.

Step 4

  • Locate the 2 screws on each fan. Unscrew them.
  • Disconnect the fan by applying gentle pressure to the circled connection with your finger and pulling.
  • Remove the fans. Be sure to keep track of the right and left fans, marked R and L.

Locate the 2 screws on each fan. Unscrew them.

Disconnect the fan by applying gentle pressure to the circled connection with your finger and pulling.

Remove the fans. Be sure to keep track of the right and left fans, marked R and L.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    diana calvo                     

Member since: 10/17/2017

144 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UC Santa Barbara, Team S1-G4, Weedon Fall 2017                        

                                                  Member of UC Santa Barbara, Team S1-G4, Weedon Fall 2017 



                    UCSB-WEEDON-F17S1G4                     


                                            5 Members                     


                                            4 Guides authored