Difficulty
Easy
Steps
4
Time Required
3 minutes
Sections
1
- Back Cover
- 4 steps
Flags
0
BackToshiba Satellite Radius P55W-B5220
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Turn off the laptop before starting.
- Remove the two rubber feet closest to the hinge with a plastic opening tool.
Turn off the laptop before starting.
Remove the two rubber feet closest to the hinge with a plastic opening tool.
1024
Step 2
- Remove the twelve M2x4mm PH0 Philips head screws.
Remove the twelve M2x4mm PH0 Philips head screws.
Step 3
- Loosen the back cover with a plastic opening tool.
- The least damaging way to pry the cover is to start from a corner and run the spudger along the edge.
- Do not crack or bend the cover.
Loosen the back cover with a plastic opening tool.
The least damaging way to pry the cover is to start from a corner and run the spudger along the edge.
Do not crack or bend the cover.
Step 4
- Carefully lift open the cover.
- Remove the attached purple ribbon cable underneath the cover.
- Do not rip the ribbon cable.
Carefully lift open the cover.
Remove the attached purple ribbon cable underneath the cover.
Do not rip the ribbon cable.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Devin Boski
Member since: 09/20/2017
478 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
University of North Texas, Team S5-G6, Thomas Fall 2017
Member of University of North Texas, Team S5-G6, Thomas Fall 2017
UNT-THOMAS-F17S5G6
5 Members
6 Guides authored
Erick Ramon Garibay Valencia - May 20, 2019
Reply
Can you show replace this model display, and please please, give de part number of the screen