Difficulty

Very easy

Steps

5

Time Required

                          1 minute

Sections

3

  • Back Panel
  • 2 steps
  • Battery
  • 2 steps
  • RAM
  • 1 step

Flags

0

  • BackToshiba Satellite P55W-C

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • To prevent injury, ensure the laptop is powered off before starting your work.
  • Unscrew the .3mm Phillips head screws on the back panel using the PH1 screwdriver.

To prevent injury, ensure the laptop is powered off before starting your work.

Unscrew the .3mm Phillips head screws on the back panel using the PH1 screwdriver.

1024

Step 2

  • Be careful to not crack the panel where the USB and power cord ports are.
  • Insert the opening tool in between the back panel and the laptop to pry it open.
  • The back panel is magnetically attached at the front of the laptop so you may have to move the opening tool along the length of the panel.
  • Lift the panel from the front off of the laptop.

Be careful to not crack the panel where the USB and power cord ports are.

Insert the opening tool in between the back panel and the laptop to pry it open.

The back panel is magnetically attached at the front of the laptop so you may have to move the opening tool along the length of the panel.

Lift the panel from the front off of the laptop.

Step 3

              Battery
  • The battery is located in the bottom right corner of the laptop.
  • Remove the four .5mm Phillips head screws on the battery using the PH1 screwdriver.

The battery is located in the bottom right corner of the laptop.

Remove the four .5mm Phillips head screws on the battery using the PH1 screwdriver.

Step 4

  • Do not tug on the cord or battery. Instead, pull evenly on the connector.
  • Lift the battery and gently pull out the bundled cable connector.

Do not tug on the cord or battery. Instead, pull evenly on the connector.

Lift the battery and gently pull out the bundled cable connector.

Step 5

              RAM
  • Lift up the flap to expose the RAM chip.
  • Un-clip the RAM by pulling the metal clips away from the chip on both sides.
  • Lift the RAM up from the laptop and pull it away from the connector.

Lift up the flap to expose the RAM chip.

Un-clip the RAM by pulling the metal clips away from the chip on both sides.

Lift the RAM up from the laptop and pull it away from the connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Alec Bonnell

Member since: 10/18/2017

497 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UMass Dartmouth, Team S3-G2, Bailey Fall 2017                        

                                                  Member of UMass Dartmouth, Team S3-G2, Bailey Fall 2017 



                    UMASSD-BAILEY-F17S3G2                     


                                            3 Members                     


                                            7 Guides authored