Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Back Panel
- 2 steps
Flags
0
BackToshiba Satellite P55W-C
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- To prevent injury, ensure the laptop is powered off before starting your work.
- Unscrew the .3mm Phillips head screws on the back panel using the PH1 screwdriver.
To prevent injury, ensure the laptop is powered off before starting your work.
Unscrew the .3mm Phillips head screws on the back panel using the PH1 screwdriver.
1024
Step 2
- Be careful to not crack the panel where the USB and power cord ports are.
- Insert the opening tool in between the back panel and the laptop to pry it open.
- The back panel is magnetically attached at the front of the laptop so you may have to move the opening tool along the length of the panel.
- Lift the panel from the front off of the laptop.
Be careful to not crack the panel where the USB and power cord ports are.
Insert the opening tool in between the back panel and the laptop to pry it open.
The back panel is magnetically attached at the front of the laptop so you may have to move the opening tool along the length of the panel.
Lift the panel from the front off of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Nicholas Caswell
Member since: 10/19/2017
117 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S3-G2, Bailey Fall 2017
Member of UMass Dartmouth, Team S3-G2, Bailey Fall 2017
UMASSD-BAILEY-F17S3G2
3 Members
7 Guides authored