Difficulty
Very easy
Steps
1
Time Required
10 minutes
Sections
- RAM
- 1 step
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackToshiba Satellite M45
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Use a #1 Phillips head screwdriver to remove the screw on the middle right of the RAM’s cover panel.
- Then, use a the blue iFixit Opening Tool to pry the cover panel off.
- Push on to the RAM tabs to disconnect the RAM form the device.
- The RAM will pop off from the socket. Gently pull the RAM out of the socket.
Use a #1 Phillips head screwdriver to remove the screw on the middle right of the RAM’s cover panel.
Then, use a the blue iFixit Opening Tool to pry the cover panel off.
Push on to the RAM tabs to disconnect the RAM form the device.
The RAM will pop off from the socket. Gently pull the RAM out of the socket.
1024
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 14 other contributors
Sophie Schneider
Member since: 04/15/2010
82 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 10-42, Garner Spring 2010
Member of Cal Poly, Team 10-42, Garner Spring 2010
CPSU-GARNER-S10S10G42
5 Members
10 Guides authored