Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- RAM
- 4 steps
Flags
0
BackToshiba Satellite M305D-S4829
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
RAM
- Unscrew the three screws from the back panel with Phillips #0 screwdriver.
- Remove the back panel.
Unscrew the three screws from the back panel with Phillips #0 screwdriver.
Remove the back panel.
1024
Step 2
- Locate the two clips holding the RAM chip in place.
- Apply pressure to each clip, pulling them away from the RAM.
- One end of the RAM will pop out.
Locate the two clips holding the RAM chip in place.
Apply pressure to each clip, pulling them away from the RAM.
One end of the RAM will pop out.
Step 3
- Gently pull RAM out as shown.
Gently pull RAM out as shown.
Step 4
- To intall a new stick of RAM, carefully insert it into into the RAM slot.
- Gently push down on the RAM chip until it snaps securely into place.
To intall a new stick of RAM, carefully insert it into into the RAM slot.
Gently push down on the RAM chip until it snaps securely into place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Michael Jensen
Member since: 04/18/2011
425 Reputation
6 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 4-3, Regan Spring 2011
Member of Cal Poly, Team 4-3, Regan Spring 2011
CPSU-REGAN-S11S4G3
5 Members
6 Guides authored