Difficulty
Moderate
Steps
7
Time Required
10 - 15 minutes
Sections
1
- RAM
- 7 steps
Flags
0
BackToshiba Satellite L875D-S7210
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Flip the laptop over and locate the screw beneath the left battery latch.
Flip the laptop over and locate the screw beneath the left battery latch.
1024
Step 2
- Use the Phillips #1 screwdriver to remove the screw.
Use the Phillips #1 screwdriver to remove the screw.
Step 3
- Using a metal spudger, slip it into the groove and gently pry open the cover.
Using a metal spudger, slip it into the groove and gently pry open the cover.
Step 4
- Locate the RAM card at the top left corner closest to the bottom of the battery.
Locate the RAM card at the top left corner closest to the bottom of the battery.
Step 5
- Using two fingers, push the two levers outwards in opposite directions of each other to release the RAM card.
Using two fingers, push the two levers outwards in opposite directions of each other to release the RAM card.
Step 6
- When done correctly, the RAM card should pop up like this.
When done correctly, the RAM card should pop up like this.
Step 7
- Remove the existing RAM card and insert the your new RAM by snapping the RAM in place. Make sure the notch on your RAM card matches up with the slot.
Remove the existing RAM card and insert the your new RAM by snapping the RAM in place. Make sure the notch on your RAM card matches up with the slot.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Ian M Sloop
Member since: 10/20/2018
667 Reputation
4 Guides authored
Badges:
4
+1 more badge
Team
UC Davis, Team S7-G7, Lore Fall 2018
Member of UC Davis, Team S7-G7, Lore Fall 2018
UCD-LORE-F18S7G7
4 Members
4 Guides authored
